|
|
|
한국건축시공학회 / v.2, no.3, 2002년, pp.163-170 
|
건식벽체에 폴리싱타일을 적용하기 위한 유기.무기질 혼합계 타일접착제 종류에 따른 부착안정성 평가에 관한 연구
( A Study on the Estimation of Adhesive Stability According to Organic.lnorganic Mixed Tile Bond Type for Application of Polishing Tile to Dry Wall System ) |
| 오상근;이기장;유재강;김수련;이성일; 서울산업대학교 건축학부;삼성중공업(주) 건설사업부문 건축기술팀;서울산업대학교 건설기술연구소;서울산업대학교 대학원;서울산업대학교 대학원;
|
|
|
 |
|
| |
| 초 록 |
|
|
| Recently, polishing tile(porcelain homogeneous polished tile) was used in the construction field as a finishing material. But, there happened some problems such as tile exfoliation by construction condition in early ages. Also, for use of polishing tile in the dry wall system which used to lightweight wall, the examination of adhesive stability of polishing tile is needed. In this study, adhesive strength of Polishing tile was investigated by tile bond types on gypsum board and non asbestos board coated by tar-urethane and Polymer modified cementitious waterproofing membrane(Series I). Then, the effect of heat stress and vibration was estimated on gypsum and non asbestos board(Series II). As the result of study are the follows; (1) Polishing tile(600$ imes$400mm) construction on waterproofing layer : Both laboratory estimation and spot examination sieve were happened that fall of tile because their hardening speed is late. (2) To using powder style adhesives in the dry wail with waterproofing layer : Adhesive strength of tile is Influenced by interface bond area and base side condition. (3) Shock and heat stresses : obvious decline of adhesive strength is not happened |
| |
| 키워드 |
| 폴리싱 타일;건식벽체;부착강도;석고보드;무석면보드;Polishing tile;The dry wall;Adhesive strength;Gypsum board;Non asbestos board; |
| |
|
|
|
|
한국건축시공학회지 / v.2, no.3, 2002년, pp.163-170
한국건축시공학회
ISSN : 1598-2033
UCI : G100:I100-KOI(KISTI1.1003/JNL.JAKO200211921501850)
언어 : 한국어 |
|
| 논문 제공 : KISTI 한국과학기술정보연구원 |
|
|
|
|
|
|
