|
|
|
한국건축시공학회 / v.4, no.2, 2004년, pp.129-136 
|
유동화공법에 의해 제조한 고유동 콘크리트의 시공 및 원가분석
( The Execution and Estimation of Construction Cost of High Fluidity Concrete Applying Flowing Concrete Method ) |
| 한민철; 청주대학교 산업과학연구소;
|
|
|
 |
|
| |
| 초 록 |
|
|
| High fluidity concrete(HFC) requires high dosage of superplasticizer to acquire sufficient fluidity, and high contents of fine powder and viscosity enhancing admixtures to resist segregation. The use of high amount of admixtures to make HFC at batcher plant in ready mixed concrete company is one of the reasons to raise the manufacturing cost of HFC. For this reason, new type of manufacturing method of HFC are described using both flowing concrete method and segregation reducing superplasticizer(SRS) in order to gain economical profit and offer the convenience for quality control.. As dosage of melamine based superplasticizer increases, it shows that fluidity and bleeding increase, while air contents and ratio of segregation resistance decrease. It also shows that addition of viscosity agent into superplasticizer reduce bleeding and improve segregation resistance of concrete. Dosage of AE agent into superplasticizer containing viscosity agent recovers loss of air contents during flowing procedure. Combination of proper contents of superplasticizer, viscosity agent and AE agent make possible to develope segregation reducing type superplasticizer. Compressive strength of high fluidity concrete applying flowing method with it is higher than that of base concrete. No differences of compressive strength between compacting methods are found. For the estimation of construction cost of high fluidity concreting using segregation reducing type superplasicizer, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer cost, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete. |
| |
| 키워드 |
| 유동화공법;분리저감형 유동화제;고유동 콘크리트;재료비;Flowing concrete method;Segregation reducing type superplasticizer;High fluidity concrete;Material cost; |
| |
|
|
|
|
한국건축시공학회지 / v.4, no.2, 2004년, pp.129-136
한국건축시공학회
ISSN : 1598-2033
UCI : G100:I100-KOI(KISTI1.1003/JNL.JAKO200411922932376)
언어 : 한국어 |
|
| 논문 제공 : KISTI 한국과학기술정보연구원 |
|
|
|
|
|
|
