라펜트│카페│블로그│더보기
아카데미 홈 명사특강 대학연구실탐방 조경실무 동영상강의 한국의 전통정원 학회별 논문
학회별 논문

한국건설관리학회
한국건축시공학회
한국도로학회
한국생물환경조절학회
한국생태학회
한국수자원학회
한국식물학회
한국실내디자인학회
한국자원식물학회
한국잔디학회
한국조경학회
한국지반공학회
한국하천호수학회
한국환경생물학회
한국환경생태학회

한국지반공학회 / v.19, no.4, 2003년, pp.95-105
암반에 근입된 현장타설말뚝의 지지력 산정기준에 대한 평가
( Assessment of Design Criteria for Bearing Capacity of Rock Socketed Drilled Shaft )
백규호;사공명; 관동대학교 공과대학 토목공학과;포항산업과학연구원 강구조연구소 토목구연구팀;
 
초 록
암반에 근입된 현장타설말뚝의 지지력 산정을 위하여 제안된 기존의 설계기준과 경험식들의 대부분은 재하시험의 결과에 일관되지 않은 파괴기준을 적용해서 얻어진 극한지지력에 근거해서 얻어졌다. 그 결과 이들산정식들은 동일한 조건에 설치된 말뚝에 대해서도 서로 다른 예측치를 제공하게 된다. 본 연구에서는 암반에 근입된 현장타설말뚝의 지지력을 합리적으로 산정할 수 있는 최적의 지지력산정식을 결정하기 위하여 기존의 지지력산정식들에 대하여 정확도를 조사하였다. 이를 위해서 11개의 재하시험 결과에 동일한 파괴기준을 적용함으로써 말뚝의 극한선단지지력과 극한주면마찰력을 결정하였으며, 이들은 기존 산정식으로부터 계산된 예측치의 정확도 조사에 이용되었다. 예측치와 측정치를 비교한 결과 Zhang과 Einstein의 제안식과 NAVFAC의 설계기준에 의해 계산된 극한선단지지력이 실측치에 가장 근접한 것으로 나타났다. 그리고 극한주면마찰력의 경우에는 Rosenberg와 Journeaux의 제안식이 만족스러운 예측치를 제공하였다.
The existing design criteria f3r the estimation of ultimate bearing capacity of drilled shaft socketed into rock masses are mainly obtained from the ultimate pile load capacities, which are determined by inconsistent failure criteria. Therefore, these design criteria generally produce difffrent predictions even for drilled shaft in the same condition. In this paper, the accuracies of the existing design criteria are investigated to develop an optimized design process for drilled shaft socketed into rock masses. Reasonable and consistent ultimate capacities of drilled shafts socked into rock masses, necessary far the check of accuracies of predictions, are determined by applying a specific failure criterion to a total of 11 pile load test results. A comparison between the predicted and the measured load capacities shows that ultimate base load capacities calculated from Zhang and Einstein's equation and NAVFAC are close to the measured values. Rosenberg and Journeaux's equation produces satisfactory prediction f3r ultimate side load capacity.
 
키워드
Design criterion;Drilled shaft;Rock socket;Side load capacity;Base load capacity;
 
한국지반공학회논문집 / v.19, no.4, 2003년, pp.95-105
한국지반공학회
ISSN : 1229-2427
UCI : G100:I100-KOI(KISTI1.1003/JNL.JAKO200311921886481)
언어 : 한국어
논문 제공 : KISTI 한국과학기술정보연구원
목록보기
회사소개 광고안내 이용약관 개인정보취급방침 책임의 한계와 법적고지 이메일주소 무단수집 거부 고객센터
   

하위배너이동