라펜트│카페│블로그│더보기
아카데미 홈 명사특강 대학연구실탐방 조경실무 동영상강의 한국의 전통정원 학회별 논문
학회별 논문

한국건설관리학회
한국건축시공학회
한국도로학회
한국생물환경조절학회
한국생태학회
한국수자원학회
한국식물학회
한국실내디자인학회
한국자원식물학회
한국잔디학회
한국조경학회
한국지반공학회
한국하천호수학회
한국환경생물학회
한국환경생태학회

한국지반공학회 / v.20, no.9, 2004년, pp.133-144
굴진면 천단 및 수평보강에 따른 굴진면 전후의 종방향 아칭 특성
( Longitudinal Arching Characteristics Around the Face of a Soil-Tunnel with Crown and Face-Reinforcement )
권오엽;최용기;이상덕;김영근; 건국대학교 토목공학과;대원토질(주);아주대학교 환경도신공학부;한국전력공사 부산전력구건설처;
 
초 록
NATM터널 시공 중 강관이나 FRP관을 이용하여 터널 막장을 선행보강하는 방법은 RPUM이나 UAM 등으로 알려져 있으며, 얕은 터널 및 연약지반내 터널 굴착 시 굴진면의 안정성을 확보해주거나 지반 침하를 감소시켜주는 역할을 한다. 특히 굴진지반이 연약하여 자립이 어려운 경우 최근에는 굴진면 천단뿐 아니라 굴진면 수평보강을 실시하여 굴착에 따른 터널안정을 확보하게 된다. 일반적으로 터널굴착이 진행됨에 따라 굴진면 전후에는 종방향 아칭현상이 발생하며 이는 NATM 터널 지보재 작용원리의 근간이 된다. 따라서 터널 천단과 굴진면 수평보강을 실시하는 경우도 굴진에 따른 종방향 아칭의 관점에서 해석되어야 하나 이에 대한 연구는 현재까지 거의 없는 실정이다. 본 연구에서는 토사터널 굴진면에 RPUM(천단보강)이나 굴진면 수평보강이 실시된 경우, 종방향 아칭특성을 2차원 실내시험을 통해 살펴보았다. 실험결과, 연직토압의 변화를 토대로 한 종방향아칭 영향범위는 무보강의 경우 굴진면 전${cdot}$후방으로 각각 2.5D와 1.5D(D는 터널직경), 천단보강 및 수평보강의 경우 2.0D와 1.5D, 천단과 수평보강이 동시에 적용된 경우는 2.0D와 1.0D까지로 측정되어 굴진면 보강에 따라 아칭의 영향범위가 감소함을 알 수 있었다. 반면 연직토압의 변화량은 굴진면 보강에 따라 증가하는 것으로 나타나 역학적으로 천단 및 수평보강재가 터널의 안정에 중요한 역할을 하고 있는 것으로 판단된다.
Pre-reinforcement ahead of a tunnel face using long steel or FRP (Fiberglass Reinforced Plastic) pipes in NATM(New Austrian Tunnelling Method), known as the RPUM(Reinforced Protective Umbrella Method) or UAM (Umbrella Arch Method), is the promising method to sustain the stability of a shallow tunnel face and reduce the ground settlements. In addition, horizontal reinforcing of the face is recently emphasized to improve the stability of the face. However, the characteristics on longitudinal arching around the face have not yet been established quantitatively with the RPUM (crown-reinforcing) and/or the face horizontal reinforcing. In this study, therefore, the behavior of cohesionless soil around the face reinforced by the reinforcing member representing the RPUM and horizontal reinforcing is investigated through two-dimensional laboratory model tests. A series of tests were carried out on various conditions by changing lengths and angles of the reinforcing members. Based on the vertical pressure around the face, the characteristics of longitudinal arching have been found for the case of the non-reinforced and the reinforced.
 
키워드
Crown-reinforced;Face-reinforced;Horizontal pressure;Longitudinal arching;Settlement ratio;Vertical pressure;
 
한국지반공학회논문집 / v.20, no.9, 2004년, pp.133-144
한국지반공학회
ISSN : 1229-2427
UCI : G100:I100-KOI(KISTI1.1003/JNL.JAKO200430710459300)
언어 : 한국어
논문 제공 : KISTI 한국과학기술정보연구원
목록보기
회사소개 광고안내 이용약관 개인정보취급방침 책임의 한계와 법적고지 이메일주소 무단수집 거부 고객센터
   

하위배너이동