라펜트│카페│블로그│더보기
아카데미 홈 명사특강 대학연구실탐방 조경실무 동영상강의 한국의 전통정원 학회별 논문
학회별 논문

한국건설관리학회
한국건축시공학회
한국도로학회
한국생물환경조절학회
한국생태학회
한국수자원학회
한국식물학회
한국실내디자인학회
한국자원식물학회
한국잔디학회
한국조경학회
한국지반공학회
한국하천호수학회
한국환경생물학회
한국환경생태학회

한국지반공학회 / v.23, no.2, 2007년, pp.61-69
말뚝형태 및 지반조건에 따른 현장타설말뚝의 수평지지력 평가
( Evaluation of Lateral Load Capacity of Drilled Shafts with Pile Shape and Soil Conditions )
이준환;백규호;김대홍;황성욱;김민기; 연세대학교 사회환경시스템공학부;관동대학교 토목공학과;한국전력공사 전력연구원;연세대학교 사회환경시스템공학부;연세대학교 사회환경시스템공학부;
 
초 록
본 연구에서는 현장타설말뚝을 대상으로 지반조건 및 말뚝형태에 따른 수평지지력과 수평거동에 대하여 실험적 분석을 실시하였다. 이를 위해 가압토조실험을 수행하였으며 상대밀도와 지반응력의 변화를 고려하여 원통형과 테이퍼형 말뚝에 대해 재하시험을 수행하였다. 토조실험결과, 수직응력과 수평응력은 모두 말뚝의 수평거동 및 극한수평 지지력에 영향을 나타내는 것으로 관찰되고 있으나, 수평응력의 영향이 보다 더 크게 작용하고 있음을 알 수 있다. 상대밀도 또한 수평거동 및 지지력에 상당한 영향을 미치고 있는 것으로 나타나고 있었다. 수평거동에 대한 말뚝형태의 영향은 지반상태에 따라 다소간의 차이가 보이고 있으나, 전반적으로 지반응렬이나 상대밀도와 같은 지반특성치에 의한 영향에 비해서는 작게 나타나고 있었다. 기존 예측식을 이용한 비교분석 결과, 기존의 예측식에 의해 산정된 결과는 실측된 결과와 상당한 차이를 보이고 있었으며, 이는 지지력 산정시 수평응력의 변화량이 고려되어 있지 않았기 때문임을 알 수 있었다.
In this study, experimental analysis was performed about lateral load capacity and behavior of laterally loaded-bored piles for soil conditions and pile shape, i.e. cylindrical and taper piles. Also, Calibration chamber load tests were performed for cylindrical and taper piles considering the variations of relative densities and restraint stresses. According to the results of chamber tests, it was found that, while both vertical and horizontal stresses affect load-responses and ultimate lateral load capacity of laterally loaded piles, effect of the horizontal stress was larger than that of the vertical stress. Effect of lateral load capacity and behavior was relatively small compared to relative density and stress state of soils surrounding piles, but showed a little difference for soil conditions. From comparison between predicted and measured lateral load capacity, it was observed that predicted results differ significantly from measured results. This is mainly due to the fact that the effect of horizontal stress is not considered in the conventional prediction methods.
 
키워드
Calibration chamber tests;CPT;Drilled shafts;Electric transmission tower;Pile load capacity;
 
한국지반공학회논문집 / v.23, no.2, 2007년, pp.61-69
한국지반공학회
ISSN : 1229-2427
UCI : G100:I100-KOI(KISTI1.1003/JNL.JAKO200712242508532)
언어 : 한국어
논문 제공 : KISTI 한국과학기술정보연구원
목록보기
회사소개 광고안내 이용약관 개인정보취급방침 책임의 한계와 법적고지 이메일주소 무단수집 거부 고객센터
   

하위배너이동